Diaphragm Pump Aluminum 1/2" for New Oil 3/4" Axle / Bore Diameter Overall Height 5-5/8" Bearing Type

Overall Height 5-5/8" Bearing Type Roller Bearing Plate Size 4" x 4-1/2" Tread Type Rubber Vulcanized To Core Core Type Nylon Swivel Radius 3-1/4" Bolt Hole Pattern 2-5/8" x 3-5/8" to 3" x 3" Bolt Hole Diameter 3/8" Durometer Shore A 80 (+/-5)

high density polypropylene

Users matching the accessory to the listed can

2 lbs Toe Plate Size 7" clear x 13" wide x 1/4" thick Wheel Type 8-inch Wheel

drain bowl and is adjustable from 36 to 65 in

Diaphragm Pump Aluminum 1/2" for New Oil 3/4" Axle / Bore Diameter Overall Height 5-5/8" Bearing TypeProduct Overview Lincoln 1 2" Aluminum Diaphragm Pump for New Oil Diaphragm pumps are driven by compressed air. The directional air distribution valve and pilot valve the "air end" are located in the center section of the pump. Liquid moves through two manifolds and outer chambers of the pump the "wet end". Generally, check valves are located at the top and bottom of each outer chamber or on a common manifold. Key source specifications include Model